Skip to content
Just Pudding Basins

Just Pudding Basins

So much more than just pudding basins..

  • Our StoreExpand
    • Pudding BasinsExpand
      • Basin By SizeExpand
        • 1/4 Pint
        • 1/2 Pint
        • 1 Pint
        • 1 1/2 Pint
        • 2 Pint
        • 3 Pint
        • 4 Pint
      • Basin By ColourExpand
        • Clear
        • Gold
        • Silver
        • Red
        • Emerald Green
        • Purple
        • Green
        • Pink
        • Sky Blue
        • Yellow
        • Lilac
        • Peach
      • Same Size Multipack
      • Mixed Size Sets
      • Mix N Match
      • Christmas Pudding Basins, Bowls and Lids
      • Pudding Basins F.A.Q
    • Howard ProductsExpand
      • Restor A Finish
      • Waxes
      • Scratch Repair
      • Polish & Cleaners
      • Furniture Repair Kits
      • Leather Care
      • Wood Care
      • Metal Care
    • Eclectic ProductsExpand
      • Shoe Goo II (2)
      • E6000 Glue
      • Famowood
      • Unicorn SPiT
    • Epoxy Resin KitsExpand
      • Epoxy Resin Kits GlassCast 3
      • Epoxy Casting Resin Kit GlassCast 10
      • Epoxy Casting Resin Kit GlassCast 50
    • Jacquard ProductsExpand
      • Starter Packs
      • Cyanotype
      • iDye Fabric DyeExpand
        • iDye for Natural Fibres
        • iDye for Synthetic Fibres
      • Procion MX Dyes
      • Fabric Pens
      • Screen Printing Inks
      • Marbling
      • Lumiere
      • Lumiere 3D Paints
      • Neopaque Acrylic Paint
      • Dye-Na-Flow
      • Pearl EX
      • Pinata Alcohol Inks
      • ColorPad Ink Pads
      • Tie Dye Kits
    • HardwareExpand
      • Wood Filler
      • Castor Cups
      • Brushes
    • Arts & CraftsExpand
      • Unicorn SPiT
      • Metallic Unicorn SPiT
      • Sparkling Unicorn SPiT
      • Artistic VivationsExpand
        • Artistic Vivations Metallic
        • Artistic Vivations Pearlescent
        • Other Artistic Vivations Products
      • Unicorn SPiT Sets
      • Jacquard Products
      • Brushes
      • Accessories
      • Pebeo Products
    • E6000 Adhesives
    • SALE | Clearance
  • About UsExpand
    • Contact Us
    • About Us
    • Delivery & Returns
    • How to Pay
  • Delivery
  • My Account
  • Cart Shopping Cart 0

    • No products in the cart.

Just Pudding Basins
Just Pudding Basins
So much more than just pudding basins..
Home / Our Store / Arts & Crafts / Unicorn SPiT

Unicorn SPiT

Unicorn SPiT available in the UK in 2 Sizes.

The Original Unicorn SPiT Paint, Gel and Stain in 1 bottle. Great for use many surfaces including, wood, glass, metal, fabric, pottery, wicker, concrete and laminate.

  • Metallic Unicorn SPiT

    Metallic Unicorn SPiT

  • Sparkling SPiT

    Sparkling SPiT

  • Unicorn SPiT Sets

    Unicorn SPiT Sets

  • Pink Unicorn SPiT - Pixie Punk Pink, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!PINK PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedPink Unicorn SPiT mixes with the Sparkling SPiT rangeMahogany Paint, Gel & Stain < Back | Next > Red Paint, Gel & StainDIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.DIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Pink Unicorn SPiT – Pixie Punk Pink

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Red Unicorn SPiT - Molly Red Pepper, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!RED PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedRed Unicorn SPiT mixes with the Sparkling SPiT range  Pink Paint, Gel & Stain < Back | Next > Orange Paint, Gel & StainDIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.DIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Red Unicorn SPiT – Molly Red Pepper

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Orange Unicorn SPiT | Phoenix Fire

    Orange Unicorn SPiT – Phoenix Fire

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Yellow Unicorn SPiT | Lemon Kiss

    Yellow Unicorn SPiT – Lemon Kiss

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • White Unicorn SPiT - White Ning, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!WHITE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedWhite Unicorn SPiT mixes with the Sparkling SPiT rangeYellow Paint, Gel & Stain < Back | Next > Cyan Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    White Unicorn SPiT – White Ning

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Cyan Unicorn SPiT - Zia Teal, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!CYAN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedCyan Unicorn SPiT mixes with the Sparkling SPiT rangeWhite Paint, Gel & Stain < Back | Next > Green Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Cyan Unicorn SPiT – Zia Teal

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Green Unicorn SPiT - Dragons Belly, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!GREEN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedGreen Unicorn SPiT mixes with the Sparkling SPiT rangeCyan Paint, Gel & Stain < Back | Next > Blue Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Green Unicorn SPiT – Dragons Belly

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Blue Unicorn SPiT - Blue Thunder, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!BLUE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedBlue Unicorn SPiT mixes with the Sparkling SPiT rangeGreen Paint, Gel & Stain < Back | Next > Purple Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Blue Unicorn SPiT – Blue Thunder

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Purple Unicorn SPiT - Purple Hill Majesty, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!PURPLE PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedPurple Unicorn SPiT mixes with the Sparkling SPiT rangeBlue Paint, Gel & Stain < Back | Next > Black Paint, Gel & StainUse Purple Unicorn SPiT as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.GENERAL DIRECTIONS:SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use a non-waterbased coating to protect, add gloss and dimension.1, Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying.2, Glass: For best results, mix Unicorn SPiT with a WATER-BASED decoupage before applying to glass. For a solid/non-transparent colour, use a 1:1 ratio of Unicorn SPiT /decoupage. For more transparent colour (stained-glass style) results, use 1-part Unicorn SPiT to 4-parts decoupage. Apply mixture directly to glass and let cure completely. To add durability to the exterior of regularly handled items, spray a light, NON-WATER BASED clear coat over project and let dry.Fabric use:Stamping method: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project).  Then, use a water bottle and your hand or brush to blend.Direct to fabric projects:  Mix Unicorn SPiT with 3-7 parts water in a spray bottle or cup and brush it on, drip it on or spray it on.   Protecting your finished project:  Use a NON-WATERBASED product intended for waterproofing fabric after Unicorn SPiT has completely dried. Washing: Fabric will retain much of the Unicorn SPiT colour if treated before washing (see various methods below)*.  For best results, wash in cold water by hand (with very little laundry detergent).  Rinse with cold water.  Various methods to increase the colourfastness of the Unicorn SPiT before washing are as follows:        - Fabric Medium:  Mix a Fabric Medium with Unicorn SPiT according to instructions on the Fabric Medium bottle.        - Allure® Dimensional Design Adhesive Paint:  Mix Unicorn SPiT with Allure Gloss (Shiny Clear) in a 1:1 ratio.  Dry flat 5 hours.  Washable after 72 hours.         - Non-waterbased fabric protectant:  Let Unicorn SPiT dry.  Apply protectant.  Allow to dry as indicated on product. Let set for 24 hours before washing.        - Hair Dryer:  Let Unicorn SPiT dry.  Use hottest blow dryer setting to heat fabric until fabric is hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Iron:  Let Unicorn SPiT dry.  Put iron on hottest setting (without moisture).  Lay wax paper over fabric.  Iron front and back of fabric until hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Vinegar:  Put fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix.  Let set in vinegar for 24 hours.  Rinse with cold water and a very small amount of laundry detergent immediately after removing from water/vinegar solution.  Lay flat to dry.        - Clothes dryer:  Put fabric with dried Unicorn SPiT design in dryer for 1 hour on hottest setting.  Remove and allow to cool to room temperature.  Let set for 24 hours before washing.    *Zia is not a colourfast colour.  Use other colours if project will be exposed to moisture.    NOTE:  If a more washed-out look is desired:  Let set for 24 hours before washing.  Machine wash in gentle cycle with cold water.  Machine dry if desired.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Purple Unicorn SPiT – Purple Hill Majesty

    Rated 4.75 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Black Unicorn SPiT - Midnights Blackness, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!BLACK PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedBlack Unicorn SPiT mixes with the Sparkling SPiT rangePurple Paint, Gel & Stain < Back | Next > Teal Green Paint, Gel & StainUse Black Unicorn SPiT as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.GENERAL DIRECTIONS:SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use a non-waterbased coating to protect, add gloss and dimension.1, Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying.2, Glass: For best results, mix Unicorn SPiT with a WATER-BASED decoupage before applying to glass. For a solid/non-transparent colour, use a 1:1 ratio of Unicorn SPiT /decoupage. For more transparent colour (stained-glass style) results, use 1-part Unicorn SPiT to 4-parts decoupage. Apply mixture directly to glass and let cure completely. To add durability to the exterior of regularly handled items, spray a light, NON-WATER BASED clear coat over project and let dry.Fabric use:Stamping method: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project).  Then, use a water bottle and your hand or brush to blend.Direct to fabric projects:  Mix Unicorn SPiT with 3-7 parts water in a spray bottle or cup and brush it on, drip it on or spray it on.   Protecting your finished project:  Use a NON-WATERBASED product intended for waterproofing fabric after Unicorn SPiT has completely dried. Washing: Fabric will retain much of the Unicorn SPiT colour if treated before washing (see various methods below)*.  For best results, wash in cold water by hand (with very little laundry detergent).  Rinse with cold water.  Various methods to increase the colourfastness of the Unicorn SPiT before washing are as follows:        - Fabric Medium:  Mix a Fabric Medium with Unicorn SPiT according to instructions on the Fabric Medium bottle.        - Allure® Dimensional Design Adhesive Paint:  Mix Unicorn SPiT with Allure Gloss (Shiny Clear) in a 1:1 ratio.  Dry flat 5 hours.  Washable after 72 hours.         - Non-waterbased fabric protectant:  Let Unicorn SPiT dry.  Apply protectant.  Allow to dry as indicated on product. Let set for 24 hours before washing.        - Hair Dryer:  Let Unicorn SPiT dry.  Use hottest blow dryer setting to heat fabric until fabric is hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Iron:  Let Unicorn SPiT dry.  Put iron on hottest setting (without moisture).  Lay wax paper over fabric.  Iron front and back of fabric until hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Vinegar:  Put fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix.  Let set in vinegar for 24 hours.  Rinse with cold water and a very small amount of laundry detergent immediately after removing from water/vinegar solution.  Lay flat to dry.        - Clothes dryer:  Put fabric with dried Unicorn SPiT design in dryer for 1 hour on hottest setting.  Remove and allow to cool to room temperature.  Let set for 24 hours before washing.    *Zia is not a colourfast colour.  Use other colours if project will be exposed to moisture.    NOTE:  If a more washed-out look is desired:  Let set for 24 hours before washing.  Machine wash in gentle cycle with cold water.  Machine dry if desired.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Black Unicorn SPiT – Midnights Blackness

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Teal Green Unicorn SPiT | Navajo Jewel

    Teal Green Unicorn SPiT – Navajo Jewel New

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Dark Brown Unicorn SPiT - Rustic Reality, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!DARK BROWN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedDark Brown Unicorn SPiT mixes with the Sparkling SPiT rangeTeal Green Paint, Gel & Stain < Back | Next > Grey Paint, Gel & StainUse Dark Brown Unicorn SPiT as a paint, gel or stain on most any material. Create masterpieces on wood, glass, metal, fabric, pottery, concrete, laminate, wicker and most other substrates.GENERAL DIRECTIONS:SHAKE WELL and test small area before use. Can be applied with a brush, foam pad, or your hands! Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate. Once dry, use a non-waterbased coating to protect, add gloss and dimension.1, Laminate use: Sand the surface with 220 sand paper after cleaning, then dust well before applying.2, Glass: For best results, mix Unicorn SPiT with a WATER-BASED decoupage before applying to glass. For a solid/non-transparent colour, use a 1:1 ratio of Unicorn SPiT /decoupage. For more transparent colour (stained-glass style) results, use 1-part Unicorn SPiT to 4-parts decoupage. Apply mixture directly to glass and let cure completely. To add durability to the exterior of regularly handled items, spray a light, NON-WATER BASED clear coat over project and let dry.Fabric use:Stamping method: Use Unicorn SPiT full strength for “stamping” (creating design on a separate surface and then “stamping” it on to a fabric project).  Then, use a water bottle and your hand or brush to blend.Direct to fabric projects:  Mix Unicorn SPiT with 3-7 parts water in a spray bottle or cup and brush it on, drip it on or spray it on.   Protecting your finished project:  Use a NON-WATERBASED product intended for waterproofing fabric after Unicorn SPiT has completely dried. Washing: Fabric will retain much of the Unicorn SPiT colour if treated before washing (see various methods below)*.  For best results, wash in cold water by hand (with very little laundry detergent).  Rinse with cold water.  Various methods to increase the colourfastness of the Unicorn SPiT before washing are as follows:        - Fabric Medium:  Mix a Fabric Medium with Unicorn SPiT according to instructions on the Fabric Medium bottle.        - Allure® Dimensional Design Adhesive Paint:  Mix Unicorn SPiT with Allure Gloss (Shiny Clear) in a 1:1 ratio.  Dry flat 5 hours.  Washable after 72 hours.         - Non-waterbased fabric protectant:  Let Unicorn SPiT dry.  Apply protectant.  Allow to dry as indicated on product. Let set for 24 hours before washing.        - Hair Dryer:  Let Unicorn SPiT dry.  Use hottest blow dryer setting to heat fabric until fabric is hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Iron:  Let Unicorn SPiT dry.  Put iron on hottest setting (without moisture).  Lay wax paper over fabric.  Iron front and back of fabric until hot.  Allow to cool back down to room temperature.  Let set for 24 hours before washing.        - Vinegar:  Put fabric with dried Unicorn SPiT design in cold water/vinegar at a 1:1 ratio mix.  Let set in vinegar for 24 hours.  Rinse with cold water and a very small amount of laundry detergent immediately after removing from water/vinegar solution.  Lay flat to dry.        - Clothes dryer:  Put fabric with dried Unicorn SPiT design in dryer for 1 hour on hottest setting.  Remove and allow to cool to room temperature.  Let set for 24 hours before washing.    *Zia is not a colourfast colour.  Use other colours if project will be exposed to moisture.    NOTE:  If a more washed-out look is desired:  Let set for 24 hours before washing.  Machine wash in gentle cycle with cold water.  Machine dry if desired.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Dark Brown Unicorn SPiT – Rustic Reality

    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Grey Unicorn SPiT - Weathered Daydream, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!GREY PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedGrey Unicorn SPiT mixes with the Sparkling SPiT rangeDark Brown Paint, Gel & Stain < Back | Next > Light Brown Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Grey Unicorn SPiT – Weathered Daydream

    Rated 5.00 out of 5
    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Light Brown Unicorn SPiT - Squirrel, allows anyone to turn ordinary objects into personalised MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Ideal for creating new – or – refinishing thousands of projects. Excellent for crafters, hobbyists, DIYers and pros alike!LIGHT BROWN PAINT, GEL STAIN and GLAZE in One!Make your project as opaque or vibrant as your dreams requireUse as a paint or dilute with water to create a gel, glaze, stain, white wash or antiquing tintPenetrates deep into bare wood grain or glazes over existing finishes, brightening and highlighting painted surfacesProvides a 3-dimensional effectJasmine scentedLight Brown Unicorn SPiT mixes with the Sparkling SPiT rangeGrey Paint, Gel & Stain < Back | Next > Sparkling Blue Paint, Gel & StainDIRECTIONS FOR USE AS A STAIN OR DYE:SHAKE BEFORE USING.Dilute Unicorn SPiT up to 50% with water to make stain. Diluting Unicorn SPiT with water allows you to control the opaqueness and absorption into the porous surface. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean and bare sample piece of the same substrate as your project, gradually adding up to 5 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the bare surface once it is completely void of all oil, sealer, dirt, grime, paint, stain, or anything that may inhibit the product from making contacting with the bare porous surface.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.After drying, lightly buff the surface with a fine grade sand paper (120-220 grit) or extra-fine steel wool (following the grain) to remove any excess or clumps.Dust off thoroughly.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product instructions. High Gloss Sealers will help achieve a three dimensional look.TIPS TO CREATE VARIOUS FINISHES: Intermingle chalky paint finishes or metallic spray paint with Unicorn SPiT to achieve unique finishes. Topcoats must be oil-based. Water-based coatings will alter the look of Unicorn SPiT.DIRECTIONS FOR USE AS A LIGHT GLAZE, WHITE WASH OR ANTIQUING AGENT:SHAKE BEFORE USINGDilute Unicorn SPiT up to 30% with water to make a light glaze, white wash or antiquing agent. Diluting Unicorn SPiT with water allows you to control the opaqueness. Add 10 parts Unicorn Spit in a re-sealable container to be diluted with water. Test the dilution on a small, dry, clean sample piece of the same substrate as your project, gradually adding up to 3 parts water until the desired effect is achieved.Apply the diluted Unicorn SPiT to the surface once it is completely void of all oil, dirt, grime, paint, stain, or anything that may inhibit the product from making contact with the surface to antique, age, paint, highlight or lowlight.Continue to add or blend multiple colours to the surface in separate areas creating designs to achieve the desired look.Once dry, use a soft (dry or damp) cloth to polish away Unicorn SPiT until your desired effect has been achieved.Apply to unsealed chalk or mineral style paint to create custom colour highlighting and lowlighting before sealing.Allow to dry. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears.Seal with any oil-based coating/sealer. For better protection and a higher gloss, repeat coats of sealer as indicated on the product’s instructions. High Gloss Sealers will help achieve a three dimensional look.CUSTOM COLOURS: Most water-based paints (chalk style or mineral based) can be mixed with Unicorn SPiT to create custom colours.If you have any further questions then visit our Unicorn SPiT FAQ SectionSafety Data Sheet can be download here.

    Light Brown Unicorn SPiT – Squirrel

    £7.99 – £12.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Starter sets

    Unicorn SPiT Set of 10

    Rated 5.00 out of 5
    £69.99 – £119.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Unicorn Spit Metallic Colours

    Unicorn SPiT Set of 6 Metallic Colours 118ml

    Rated 5.00 out of 5
    £46.99
    Add to cartLoading Done
  • Sparkling Unicorn SPiT Set of 6 - 236ml

    Unicorn SPiT Set of 6 Spakling Colours 236ml

    £73.99
    Add to cartLoading Done
  • KIT - SPiT Set of 7 Sparkling - 118ml

    Unicorn SPiT Set of 7 Spakling Colours 118ml

    Rated 5.00 out of 5
    £55.49
    Add to cartLoading Done
  • Unicorn SPiT Set

    Unicorn SPiT Set of 14

    Rated 5.00 out of 5
    £97.99 – £159.99
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sparkling Blue Unicorn SPiT | Sapphire Swift

    Sparkling Blue Unicorn SPiT – Sapphire Swift

    Rated 5.00 out of 5
    £8.99 – £13.49
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • All the Sparkle with no Colour - Iced Egret

    Sparkling Clear Unicorn SPiT – Iced Egret

    Rated 5.00 out of 5
    £8.99
    Add to cartLoading Done
  • Sparkling Gold Unicorn SPiT | Golden Gosling

    Sparkling Gold Unicorn SPiT – Golden Gosling

    Rated 5.00 out of 5
    £8.99 – £13.49
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sparkling Green Unicorn SPiT | Lavish Lovebirds

    Sparkling Green Unicorn SPiT – Lavish Lovebirds

    Rated 5.00 out of 5
    £8.99 – £13.49
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page

  • Sparkling Pink Unicorn SPiT – Starling Sasha

    Rated 5.00 out of 5
    £8.99 – £13.49
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Sparkling red Unicorn SPiT | Dolly Firebird

    Sparkling Red Unicorn SPiT – Dolly Firebird

    Rated 5.00 out of 5
    £8.99 – £13.49
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page

  • Sparkling Violet Unicorn SPiT – Violet Vulture

    Rated 5.00 out of 5
    £8.99 – £13.49
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • 10x Mini Bottle for Unicorn SPiT

    Mini Squeezable Bottles

    Rated 5.00 out of 5
    £4.99
    Add to cartLoading Done
  • Unicorn Spit Handbook

    Unicorn SPiT Official Users Handbook

    £17.99
    Read moreLoading Done
  • Unicorn SPiT Metallic Hephaestus

    Unicorn SPiT Metallic Bronze – Hephaestus

    £8.99
    Add to cartLoading Done
  • Unicorn SPiT Metallic Athena

    Unicorn SPiT Metallic Copper – Athena

    Rated 5.00 out of 5
    £8.99
    Add to cartLoading Done
  • 1
  • 2
  • →
We've squashed our Postage Cahrges
Just Pudding Basins 100% Owned by it's employees
Jacquard Neopaque
Jacquard Neopaque

Sign up for our newsletter

  • Artistic Vivations Dionysus (royal purple)
    Artistic Vivations Dionysus (royal purple)
    £18.99 Original price was: £18.99.£14.99Current price is: £14.99.
    Add to cart
  • White Artistic Vivations
    White Artistic Vivations Pearlescent - Diamond White
    £18.49 Original price was: £18.49.£14.99Current price is: £14.99.
    Add to cart
  • Black Artistic Vivations
    Black Artistic Vivations Pearlescent - Black Onyx
    £18.49 Original price was: £18.49.£14.99Current price is: £14.99.
    Add to cart
  • Platinum Silver Artistic Vivations
    Platinum Silver Artistic Vivations Metallic - Artemis
    £18.99 Original price was: £18.99.£14.99Current price is: £14.99.
    Read more

Recent reviews

  • Emerald Green Pudding Basins with Lids 1.5 pint 1.5 Pint - 850ml - Green Pudding Basin and Lid (3 Pack)
    Rated 5 out of 5
    by David Barry Jones
  • 1/2 Pint Red Pudding Basins 1/2 Pint - 280ml - Red Pudding Basin and Lid (6 Pack)
    Rated 5 out of 5
    by Matthew
  • 1.5 Pint Pudding Basin and Lid 1.5 Pint Pudding Basin
    Rated 5 out of 5
    by Isla Pyka
  • 1 Pint Pudding Basin and Lid 1 Pint – 570ml – Clear Pudding Basin and Lid (6 Pack)
    Rated 5 out of 5
    by Isla Pyka
  • Howard Feed N Wax enhances the natural beauty and depth of grain in finished and unfinished wood. Polishes all wood surfaces to a soft lustre and protects with a coating of natural waxes.  Prevents drying and deterioration of all wood finishes.Maintains the restored finish after using Restor-A-Finish®. Feed-N-Wax has a unique gel-like consistency making very easy to apply, it should be used every month or so or whenever the finish looks dry or faded. Recommended for finishes that are cracked or crazed to prevent further drying or deterioration and to help preserve the wood finish.  On unfinished wood, helps introduce natural oils to the wood to prevent drying out.Our original blend of beeswax, Brazilian carnauba wax, mineral oil, and orange oil is the perfect product to enhance the natural beauty and depth of grain in all woods, finished and unfinished. Feed-N-Wax was developed as the best follow-up to Restor-A-Finish for maintaining the newly restored finish.Contains no silicone or linseed oils. Not intended for food-prep surfaces. For food-prep surfaces use Howard Butcher Block Conditioner or Cutting Board Oil. Feed N Wax
    Rated 5 out of 5
    by Anonymous

Departments

  • Pudding Basins
  • Howard Products
  • Jacquard Products
  • E6000 Adhesives
  • Arts & Crafts
  • Hardware
  • Clearance area

Information

  • About Us
  • Contact Us
  • My Account
  • Delivery & Returns
  • How to Pay
  • Trade Enquiries

Media

  • Videos
  • Pudding Basins FAQ’s
  • UNiCORN SPiT FAQ’s
  • E6000 FAQ’s
  • Epoxy Resin FAQ’s
  • Recipes | Puddings
  • JPB Blog

Company Details

Just Pudding Basins Ltd
4 Enterprise Road
Golf Road Ind Est
Mablethorpe
Lincolnshire
LN12 1NB

Tel 01507 622809

  • Terms and Conditions
  • Privacy Policy
  • Cookie Policy
  • Disclaimer
Facebook Instagram YouTube TikTok

© 2024 Just Pudding Basins Limited

Review Cart

No products in the cart.

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
Cookie settingsACCEPT
Manage consent

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary
Always Enabled
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Functional
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance
Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytics
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on metrics the number of visitors, bounce rate, traffic source, etc.
CookieDurationDescription
_ga2 yearsThe _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors.
_ga_G4C9MFFXRF2 yearsThis cookie is installed by Google Analytics.
CONSENT2 yearsYouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data.
Advertisement
Advertisement cookies are used to provide visitors with relevant ads and marketing campaigns. These cookies track visitors across websites and collect information to provide customized ads.
CookieDurationDescription
VISITOR_INFO1_LIVE5 months 27 daysA cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface.
YSCsessionYSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages.
yt-remote-connected-devicesneverYouTube sets this cookie to store the video preferences of the user using embedded YouTube video.
yt-remote-device-idneverYouTube sets this cookie to store the video preferences of the user using embedded YouTube video.
yt.innertube::nextIdneverThis cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen.
yt.innertube::requestsneverThis cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen.
Others
Other uncategorized cookies are those that are being analyzed and have not been classified into a category as yet.
CookieDurationDescription
m2 yearsNo description available.
woocommerce_recently_viewedsessionDescription unavailable.
wp_woocommerce_session_c2175057f8356b9650ba6047a05723a92 daysNo description
SAVE & ACCEPT
Powered by CookieYes Logo
  • Pudding Basins
    • Basins By Colour Choice
    • Basins By Size Choice
      • ¼ Pint Pudding Basins – 140ml
      • ½ Pint Pudding Basins – 280ml
      • 1 Pint Pudding Basins – 570ml
      • 1½ Pint Pudding Basins – 850ml
      • 2 Pint Pudding Basins – 1.14lt
      • 3 Pint Pudding Basins – 1.7lt
      • 4 Pint Pudding Basins – 2.27lt
    • Mix N Match
    • Pudding Basins F.A.Q
    • Christmas Pudding Basins, Bowls and Lids
  • Howard Products
    • Restor A Finish
    • Wood Care and Waxes
    • Polish & Cleaners
  • Eclectic Products
    • Shoe Goo Shoe Repair Glue
    • Famowood Wood Filler
  • Jacquard Products
    • Cyanotype
    • Marbling
    • Lumiere
    • Lumiere 3D Paints
    • Neopaque Acrylic Paint
    • Dye-Na-Flow
    • Pearl EX
    • Pinata Alcohol Inks
    • Screen Printing Inks
    • Fabric Pens
    • iDye Fabric Dye
      • iDye for Natural Fibres
      • iDye for Synthetic Fibres
    • Tie Dye Kits
    • Procion MX Dyes
    • ColorPad Ink Pads
  • Glass Cast Epoxy Resin Kits
    • Glass Cast 50
    • Glass Cast 3
  • Arts & Crafts
    • Unicorn SPiT
    • Metallic Unicorn SPiT
    • E6000 Adhesive
    • Jacquard Products
    • Pebeo Products
  • Hardware
  • Clearance SALE !
  • Delivery & Returns
  • About Us
  • Ready to Help You
  • JPB Blog
  • My Account
  • Cart | Checkout
Facebook Facebook